Hydraulic fixed collet chuck for stationary precision clamping.
JHS Hydraulic Fixed Collet Chuck
KORRETTO JHS hydraulic fixed collet chuck is used for stationary or fixture-side collet clamping where hydraulic actuation is required. It is suitable for round parts, shafts, sleeves and precision components that need stable holding in a fixed layout. This page covers the JHS hydraulic fixed series only and should not be merged with the general Fixed Collet Chuck page.
Product Overview
The JHS hydraulic fixed collet chuck is selected for fixed-station clamping where the workpiece is held by a collet and the clamping force is provided by hydraulic actuation. It is used in fixtures, special machines and non-rotary or fixed-position clamping systems.
Selection should confirm workpiece diameter, collet type, hydraulic pressure, fixture interface, clamping stroke and required repeat positioning.
Key Features
| Feature | Description |
|---|---|
| Hydraulic fixed structure | Used for stationary collet clamping with hydraulic actuation. |
| Fixed-position workholding | Suitable for fixtures and special-machine layouts. |
| Stable round-part support | Provides collet contact around shafts, sleeves and cylindrical parts. |
| Compact clamping station | Useful where a standard jaw chuck is not suitable. |
| Separate JHS series | Different from the general Fixed Collet Chuck page. |
Technical Data and Dimensions
Use the drawing and available technical data to check hydraulic pressure, fixture interface, clamping stroke, mounting layout and workpiece compatibility for the JHS series.
FAQ
What is the JHS hydraulic fixed collet chuck used for?
It is used for stationary hydraulic collet clamping of round workpieces in fixed fixtures or special-machine layouts.
Is this the same as the Fixed Collet Chuck page?
No. JHS Hydraulic Fixed Collet Chuck is a hydraulic fixed series with its own drawing and selection requirements.
When should I choose a hydraulic fixed collet chuck?
Choose it when the workpiece needs fixed-position collet clamping and hydraulic force is required.
What information is needed for selection?
Provide the workpiece drawing, clamping diameter, collet type, hydraulic pressure, fixture interface, clamping stroke and required repeatability.
Can this chuck be used in rotary applications?
This page is for fixed or stationary clamping layouts. For rotary hydraulic collet clamping, use the JHB Hydraulic Rotary Collet Chuck series.