Air-actuated rotary pull-back collet chuck for stable axial seating and round-part clamping.
JAD Air Rotary Pull-Back Collet Chuck
KORRETTO JAD air rotary pull-back collet chuck uses air actuation and pull-back clamping action for rotary collet workholding. It is suitable for round parts, shafts and sleeves that need repeat clamping, stable axial seating and compact spindle-side installation. This page covers the JAD pull-back series only and should not be mixed with front-push, hydraulic rotary or passive collet chuck series.
Product Overview
The JAD air rotary pull-back collet chuck is selected when the workpiece needs to be pulled back toward the locating face during clamping. This helps improve axial seating, repeat positioning and pull-back collet workholding for suitable round parts, shafts and sleeves.
Selection should confirm workpiece diameter, collet type, pull-back stroke, air pressure, mounting interface, maximum speed, clamping force and the required locating method.
Key Features
| Feature | Description |
|---|---|
| Pull-back clamping action | Draws the collet or workpiece toward the locating side during clamping. |
| Air rotary actuation | Uses pneumatic actuation for rotary collet workholding. |
| Stable axial seating | Suitable when axial positioning is part of the clamping requirement. |
| Round-part workholding | Used for shafts, sleeves and cylindrical components. |
| Separate JAD series | Do not mix with JHA7-44, JAW, JHB, JHS or JT-W series pages. |
Technical Data for JAD Air Rotary Pull-Back Collet Chucks
Use the drawing and parameter table to check the collet range, mounting dimensions, pull-back stroke, air pressure, maximum speed, clamping force and matching machine layout.
| Model | ΦA | ΦB | ΦC(H6) | D | E | F | ΦG | J | Max. Speed (r/min) | Piston Stroke (mm) | Clamping Stroke (mm) | Max. Torque (N·m) | Operating Pressure (kg/cm²) | Clamping Range | Matching Collet | Weight (kg) | Clamping Type |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| JAD-15 | 100 | 84 | 70 | 40 | 5 | 80 | 72 | 4-M6 Countersunk Holes | 4000 | 3 | 1.5 | 3 | 2–7 | Φ2–14 | YB-15 | 3.2 | Pull-Back |
| JAD-25 | 166 | 147 | 130 | 58 | 5 | 106 | 106 | 4-M8 Countersunk Holes | 4000 | 4 | 1.5 | 15 | 2–7 | Φ3–25 | YB-25 | 9.5 | Pull-Back |
| JAD-40 | 187 | 168 | 150 | 68 | 5 | 116 | 133 | 4-M8 Countersunk Holes | 4000 | 4 | 1.5 | 30 | 2–7 | Φ5–40 | 16C | 13.5 | Pull-Back |
| JAD-60 | 220 | 203 | 170 | 73 | 5 | 132 | 169 | 4-M8 Countersunk Holes | 3000 | 4 | 1.5 | 35 | 2–7 | Φ5–60 | 20C | 20.5 | Pull-Back |
Related Collet Chuck Pages
FAQ
What is the JAD air rotary pull-back collet chuck used for?
It is used for rotary collet clamping where air actuation, pull-back clamping action and stable axial seating are required.
What does pull-back clamping mean?
Pull-back clamping draws the collet or workpiece toward the locating side during clamping, helping support axial seating and repeat positioning.
Is this the same as a front-push collet chuck?
No. JAD is a pull-back collet chuck series. Front-push and passive collet chucks are separate structures.
What information is needed for selection?
Provide the workpiece drawing, clamping diameter, collet type, pull-back stroke, air pressure, mounting interface, target speed and clamping force requirement.
When should I choose a pull-back collet chuck?
Choose it when the process needs round-part collet clamping with improved axial seating against a locating face.