KORRETTO · CLAMPING HEAD SYSTEMS
Clamping Head Changeover Tool
The KORRETTO Clamping Head Changeover Tool helps install and remove compatible rubber-flex collets during setup and maintenance. Manual tools cover the listed CCT sizes; pneumatic tools and dedicated automation designs are available for other changeover requirements.
How It Works
The matched tool engages the head for controlled installation or removal from the chuck. Choose the tool from the clamping-head code, chuck access and manual or automated handling method. Custom designs can support gantry robots or articulated robot arms.
Selection should confirm the compatible collet system, tool type, collet size, changeover method and required setup procedure.
Key Features
Manual changing tools
CCT42, CCT52, CCT65 and CCT80 cover the listed head codes.
Pneumatic options
The catalog specifies pneumatic tools for larger heads.
Automation integration
Dedicated designs can be matched to gantry robots and robot arms.
Head and tool compatibility
Confirm the head reference and available engagement space.
Typical Applications
- Rubber-flex collet replacement
- Collet changeover during setup
- Maintenance of rubber-flex chuck systems
- Workpiece-size changeover
- Production setup support
Technical Data: Clamping Head Changeover Tool
Use the drawing and parameter table to check tool type, compatible collet range, dimensions and setup requirements.
| Tool Model | Compatible Collet Code |
|---|---|
| CCT42 | 42S/SR/RL |
| CCT52 | 52S/SR/RL |
| CCT65 | 65S/SR/RL |
| CCT80 | 80S/SR/RL |
What to Provide Before Quotation
- Clamping-head code and chuck model
- Manual, pneumatic or robot-assisted changeover
- Available access, robot layout and changeover frequency
Related Clamping Head Systems
FAQ
What is the Clamping Head Changeover Tool used for?
It is used to assist removal, installation or replacement of segmented clamping heads during setup and maintenance.
Is this a segmented clamping head?
No. It is the tool used to install or remove a compatible clamping head.
Is this the same as a bore tool?
No. A changeover tool is used for collet replacement. A bore tool is used for bore machining or sizing.
What should be checked before selection?
Check the clamping head system, collet size, tool type, changeover method and setup procedure.
Can this tool be used with all segmented clamping heads?
No. Choose the tool by the head reference and chuck access. The manual CCT models cover the listed sizes; larger heads require the appropriate pneumatic tool.
Why use a changeover tool?
It helps replace collets more safely and consistently during setup changes or maintenance.
When is a changeover tool most useful?
It is especially useful when production changes workpiece sizes often, when collets are replaced frequently or when setup consistency matters across repeated changeovers.
What information should I send for quotation?
Send the segmented clamping head model, chuck system, machine model, installation space, present changeover method, changeover frequency and whether spare parts or matching tools are also required.