KORRETTO · permanent magnetic chucks
Single Tilt Fine Pole Permanent Magnetic Chuck
Single tilt fine pole permanent magnetic chucks combine fine pole magnetic holding with a single tilting structure. They are suitable for angle grinding, small ferromagnetic parts and precision workpieces requiring stable permanent magnetic holding.
Send the workpiece size, required angle, thickness, contact area and grinding setup, and we will help check the suitable single tilt fine pole permanent magnetic chuck model.
Product Overview
Single tilt fine pole permanent magnetic chucks combine fine pole holding and single-direction tilt adjustment for angle grinding and precision workholding of small ferromagnetic parts.
How a Single Tilt Fine Pole Magnetic Chuck Works
Closely spaced permanent-magnet poles form short magnetic circuits through small or thin ferromagnetic workpieces, while a single tilt stage changes the working-surface angle in one direction. After the required angle is set, the mechanism is locked before grinding. Fine-pole holding depends on the part bridging enough adjacent poles with minimal air gap; angle accuracy depends separately on clean reference surfaces, the adjustment method and secure mechanical locking.
Typical Applications
- Single-angle grinding of ferromagnetic workpieces
- Small precision parts requiring fine pole support
- Grinding setups requiring single tilt structure
- Workholding scenarios with controlled tilt angle positioning
Key Features
Single tilt structure
Supports controlled single-direction angle setup.
Fine pole magnetic holding
Suitable for small or precision ferromagnetic workpieces.
Permanent magnetic clamping
No continuous holding power during operation.
Angle grinding support
Model table includes grinding-angle related data.
Parameters and Dimensions
Use the dimension drawing and parameter table below to verify dimensions, grinding angle and net weight before selecting the model.
Dimension Drawing
| Inch Model | Model | Main Dimensions (mm) | Grinding Angle | Net Weight (kg) | |||||
|---|---|---|---|---|---|---|---|---|---|
| A | B | C | D | E | F | ||||
| 4"*7" | XM42A 100*175 | 225 | 112 | 85 | 75 | 44 | 1.5(0.5+1) | 0°-60° | 15 |
| 5"*10" | XM42A 125*250 | 304 | 125 | 85 | 75 | 44 | 1.5(0.5+1) | 0°-60° | 25 |
| 6"*6" | XM42A 150*150 | 200 | 152 | 85 | 100 | 44 | 1.5(0.5+1) | 0°-60° | 18 |
| 6"*12" | XM42A 150*300 | 350 | 152 | 85 | 100 | 44 | 1.5(0.5+1) | 0°-60° | 45 |
Selection Notes
Provide workpiece size, thickness, contact area, required angle range and machine setup to confirm the suitable single tilt fine pole model.
When a Single Tilt Fine Pole Chuck Is Not Suitable
A single-tilt model is not suitable for compound angles that require adjustment in two directions. Do not use it for non-ferromagnetic parts, workpieces that cannot bridge the fine poles, poor surface contact, or angles outside the listed range. Very thin parts must also be checked for grinding-force movement and distortion. Confirm that the tilted chuck, workpiece and locking hardware remain clear of the wheel and machine throughout the operation.
FAQ
What is a single tilt fine pole permanent magnetic chuck used for?
It is used for angle grinding and precision magnetic holding of small or thin ferromagnetic workpieces where a single tilt adjustment is required.
How is it different from a standard fine pole permanent magnetic chuck?
A standard fine pole permanent magnetic chuck is used for flat holding, while the single tilt version adds angle adjustment for inclined grinding setups.
What information should I provide for model selection?
Please provide workpiece size, thickness, holding area, required tilt angle and machine setup so the suitable single tilt fine pole permanent magnetic chuck can be confirmed.
What tilt angle and workpiece size should be checked?
Please confirm the required angle range, workpiece dimensions, thickness and magnetic contact area before choosing the model.
What machine table or mounting surface should be confirmed?
Please confirm the grinder table size, mounting interface, usable height and available angle-setting space before installation.
Is it suitable for fine grinding of small parts?
Yes. It is especially suitable for smaller ferromagnetic workpieces that require both fine pole support and a single-angle grinding setup.
What should be checked before installation?
Check the base flatness, angle adjustment mechanism, magnetic switch operation and workpiece coverage on the chuck surface before use.
What information is needed for quotation?
Please provide workpiece drawings or dimensions, required tilt angle, machine table size, holding area and application details.
